GE LOGIQ S8 Service Manual page 189

GE H
EALTHCARE
D 5394227, 12
IRECTION
4-3-8 Moving and Transporting the LOGIQ S8
4-3-8-1 Before moving the system
When moving or transporting the system, follow the precautions below to ensure the maximum safety
for personnel, the system, and other equipment.
When the system is not in use AND/OR before moving/transporting the system, make sure that
CAUTION
the control panel/the monitor arm lock firmly and flip down the monitor to prevent system
damage.
DO NOT place probes or the footswitch into the side tray when moving/transporting the system.
CAUTION
It is not storage space for probes, footswitch and any peripheral devices.
If you park the system on a slippery slope, you MUST use the brakes on the wheel.
CAUTION
This equipment is not to be used during transportation (e.g. ambulance cars, aircraft).
CAUTION
DO NOT attempt to move the console using any cables or fixtures, such as the probe
CAUTION
connectors.
Handle carefully. A drop of more than 5 cm can cause mechanical damages.
CAUTION
PROPRIETARY TO GE
Section 4-3 - General procedures
LOGIQ S8/LOGIQ E8 S M
ERVICE ANUAL
4 - 13