GE LOGIQ S8 Service Manual page 328

GE H
EALTHCARE
D 5394227, 12
IRECTION
To configure automatic data transfers:
1.) Navigate to ADMIN > System Admin.
2.) On System Admin, configure these settings:
-
-
-
3.) Click Save.
4.) Navigate to Utility (second page) > Service > Utilities > Data Transfer.
5.) On Data Transfer, select Scheduler, and then select the days to perform the data transfer.
6.) Click Save Settings.
7.) To manually perform a data transfer, click Send All.
7 - 58
Transfer Machine Logs to GE – Default is checked
Transfer Operator Information to GE
Transfer Images (captured without patient information) to GE – Default is checked.
Section 7-6 - Service Desktop (R4.2.5x and later)
LOGIQ S8/LOGIQ E8 S M
ERVICE ANUAL