When The Touch Panel Does Not Response; Limitation Message During Afi Analysis - GE LOGIQ S8 Service Manual

GE H
EALTHCARE
D 5394227, 12
IRECTION
7-7-20

When the touch panel does not response

From R4 system, the touch panel changes to electrostatic type. If the keys does not respond, clean the
touch panel first. If the gel or somehting remains on the touch panel, it does not reposnd.
7-7-21

Limitation message during AFI Analysis

The limitaion message "Over Depth too high for analysis xx.xx cm, EXIT" displays when you measure
AFI deeper than 20 cm. Measure whithin 20cm.
Section 7-7 - Troubleshooting Trees, Instructions and Tech Tips
LOGIQ S8/LOGIQ E8 S M
ERVICE ANUAL
7 - 83