GE LOGIQ S8 Service Manual page 263

GE H
EALTHCARE
D 5394227, 12
IRECTION
6-2-1-3 OSD
6-2-1-3-1
1.) Press the MENU (middle) key of the monitor controls over 10 sec.
2.) Select the OSD -> LANGUAGE by pressing the < LEFT or RIGHT > button to move the cursor and
the MENU (middle) key.
3.) Select English/German/French/Spanish/ Italian/Swedish/Chinese/Japanese by pressing the <
LEFT or RIGHT > button to decrease/increase the value and the MENU (middle) key. (Default :
English)
6-2-1-3-2
1.) Press the MENU (middle) key of the monitor controls over 10 sec.
2.) Select the OSD -> H-POSITION by pressing the < LEFT or RIGHT > button to decrease/increase
cursor and the MENU (middle) key.
3.) Adjust the H-POSITION by pressing the < LEFT or RIGHT > button to decrease/increase the value.
(default : 50)
6-2-1-3-3
1.) Press the MENU (middle) key of the monitor controls over 10 sec.
2.) Select the OSD -> V-POSITION by pressing the < LEFT or RIGHT > button to decrease/increase
cursor and the MENU (middle) key.
3.) Adjust the V-POSITION by pressing the < LEFT or RIGHT > button to decrease/increase the value.
(default : 50)
6-2-1-3-4
1.) Press the MENU (middle) key of the monitor controls over 10 sec.
2.) Select the OSD -> HALF TONE by pressing the < LEFT or RIGHT > button to decrease/increase
cursor and the MENU (middle) key.
3.) Adjust the HALF TONE by pressing the < LEFT or RIGHT > button to decrease/increase the value.
(default : 50)
Figure 6-6 OSD
Language
H-Position
V-Position
Half Tone
Section 6-2 - Monitor Adjustment
LOGIQ S8/LOGIQ E8 S M
ERVICE ANUAL
6 - 7