GE LOGIQ S8 Service Manual page 153

GE H
EALTHCARE
D 5394227, 12
IRECTION
3-12-5 TCPIP (cont'd)
Table 3-10
Preset Parameter
Enable DHCP
IP-Address
Subnet Mask
Default Gateway
Network Speed
NOTE: Reboot the system to activate any changes saved from this page.
PROPRIETARY TO GE
IP settings
DO NOT select this box to enable dynamic IP Address selection.
NOTE: The system shall disable IP-Address, Subnet Mask, and Default Gateway
when the user chooses to use DHCP.
Type the IP Address of the Ultrasound system. NOTE: IP stands for Internet
Protocol. Every device on the network has a unique IP address.
Type the subnet mask address. NOTE: The Subnet Mask is an IP address filter that
eliminates communication/messages from network devices of no interest to your
system.
Type the default gateway address.
Select the network speed (Auto Detect, 10Mbps/Half/Full Duplex, or 100 Mbps/Half/
Full Duplex/1000Mbps/Auto-negotiate)
Section 3-12 - Configuring Connectivity
LOGIQ S8/LOGIQ E8 S
Description
M
ERVICE ANUAL
3 - 75