GE LOGIQ S8 Service Manual page 159

Hide thumbs Also See for LOGIQ S8:

Table of Contents

3-12-8 Instructions for setting up Network Storage on LOGIQ S8 R4 (cont'd)

Select Button Tab. Select a Print Button, then add the USB Quick Save to the Printflow View by

selecting >>. If Copy to Dataflow is in PrintFlow View, remove by selecting <<, then click Save.

It takes a long time to access Network Storage Service by the condition of the network.

PROPRIETARY TO GE

Section 3-12 - Configuring Connectivity

LOGIQ S8/LOGIQ E8 S

Chapters

Table of Contents