Reset The P2 Key To Customer's Functionality - GE LOGIQ P6 Service Manual

GE H
EALTHCARE
D 5245279, R
IRECTION EVISION
7-5-3 Capturing a Screen
5.) A Save dialog box will be opened. Choose d:\export folder as the archive location to save the
The InSite connection will have access to the export folder on the "D" drive to retrieve these images.
7-5-4

Reset the P2 Key to Customer's Functionality

If the customer had programmed the P2 Key to a function other than screen capture, restore that
functionality recorded in section 7-5-1 on page 9. Refer to the Figure 7-7.
1.) Select Utility from the Keyboard.
2.) Select Connectivity from the Menu.
3.) Select the Buttons tab on the Connectivity screen.
4.) In the Button field, select Print2.
5.) In the "Physical Print Buttons"box, select the options recorded in
7 - 12
3
(cont'd)
Figure 7-10 Save Dialog Box
image on the hard disk or CD-R or USB.
* Format
* Image Frames
* Capture Area
* Compression
Section 7-5 - Screen Captures
LOGIQ™ P6/P6 P S
RO ERVICE
step 5, Section 7-5-1. :
M
ANUAL