GE LOGIQ P6 Service Manual page 258

GE H
EALTHCARE
D 5245279, R
IRECTION EVISION
8-2-7 Sub Keyboard Assy
8-2-7-1 Tools
• Common philips screwdrivers
8-2-7-2 Preparations
• Shut down the system and switch off the main breaker.
8-2-7-3 Removal procedure
1.) Remove the Main Keyboard Assy. Refer to the
2.) Unscrew 4 screws. 2 screws(1,3) are back of the speaker enclosures, and 2 screws(2,4) are bttom
of sub keyboard. Refer to the Figure 8-74.
3.) Perform the following functional tests. If all are successful, include the debrief script provided below.
Table 8-8
Service Manual
Section 4-3-1
Section 4-3-2
Section 4-7-2
8-2-7-4 Mounting Procedure
Install the new parts in the reverse order of removal.
8 - 38
3
Figure 8-74 4 Screw Sub Keyboard Assy
Functional Tests
Section Functional Test / Diagnostic Test
Sub Keyboard Assy Function Validation
Section 8-2 - DISASSEMBLY/RE-ASSEMBLY
8-2-6 "Main Keyboard Assy" on page
Power On/Boot Up
Power Off / Shutdown
Procedure
LOGIQ™ P6/P6 P S
RO ERVICE
Debrief Script
"Service Manual, Direction
5245279, Rev 3+, Section 8-2-7. Equipment
passed all required tests and is ready for use. "
M
ANUAL
8-36.