Dtrx Cooler With Heatsink Function Validation Procedure; Acpc Ii Assy Set Function Validation Procedure - GE LOGIQ P6 Service Manual

GE H
EALTHCARE
D 5245279, R
IRECTION EVISION
4-9-11

DTRX Cooler with heatsink Function Validation Procedure

1.) Turn on the system
2.) Check the basic function of system's different modes. Refer to the
Checks" on page 4-6
Refer to the
4-9-12

ACPC II Assy set Function Validation Procedure

1.) Turn on the system. Refer to the
Assy function. The system must show correct operation as described on sequence.
2.) Check the peripheral operation. Refer to the
peripheral must work correctly as described Section 4-5.
4 - 46
3
and refer to the
10-5-2-1 "System Checks" on page
3-5-1 "Power On/Boot Up" on page 3-11
Section 4-9 - Board Function Checks
LOGIQ™ P6/P6 P
4-3-5 "System CFM and PWD Checks" on page
10-8.
Section 4-5 "Peripheral Checks" on page
S M
RO ERVICE ANUAL
4-3-4 "System B/M-Mode
4-7.
sequence to check AP950
4-21. All