GE LOGIQ P6 Service Manual page 266

GE H
EALTHCARE
D 5245279, R
IRECTION EVISION
8-2-13 Keycap set, Main Keyboard Encoder Knob set
8-2-13-1 Tools
• Common philips screwdrivers
8-2-13-2 Preparations
• Shut down the system and switch off the main breaker.
8-2-13-3 Removal procedure
1.) Remove key caps from the keyboard.
2.) Perform the following functional tests. If all are successful, include the debrief script provided below.
Table 8-14
Service Manual
Section 4-3-1
Section 4-3-2
Section 4-8-3
Section 10-5-5
8-2-13-4 Mounting Procedure
Install the new parts in the reverse order of removal.
8 - 46
3
Figure 8-85 Key Caps
Functional Tests
Section Functional Test / Diagnostic Test
TGC key assy/TGC Knob set, Sub keyboard
encoder Knob Set, keycap set, Main keyboard
Encoder Knob set Function Validation
Section 8-2 - DISASSEMBLY/RE-ASSEMBLY
Power On/Boot Up
Power Off / Shutdown
Procedure
Physical Inspection
LOGIQ™ P6/P6 P S
RO ERVICE
Debrief Script
"Service Manual, Direction
5245279, Rev 3+, Section 8-2-13. Equipment
passed all required tests and is ready for use. "
M
ANUAL