GE LOGIQ P6 Service Manual page 237

GE H
EALTHCARE
D 5245279, R
IRECTION EVISION
8-2-4-3 Removal procedure (cont'd)
15.)Unscrew 3 screws (2159634, BH M4x10 WHT) after removing the rubber caps to remove neck front
cover, neck rear cover. Refer to the figure below.
Figure 8-31 Unscrewing 3 screws and removing the neck front cover & neck rear cover
16.)Unscrew 3 screws(5327646, HSH M6 X 16 WHT) to separate the flexible arm neck pipe. Refer to
the figure below.
3
Figure 8-32 Separating the neck pipe
Section 8-2 - DISASSEMBLY/RE-ASSEMBLY
LOGIQ™ P6/P6 P S
RO ERVICE
M
ANUAL
8 - 17