Bp128 Assy Function Validation Procedure - GE LOGIQ P6 Service Manual

GE H
EALTHCARE
D 5245279, R
IRECTION EVISION
4-9-8

BP128 Assy Function Validation Procedure

1.) Turn on the system
2.) All of attached ASSY should be tested.
3.) Refer to the
4.) Refer to the
5.) Refer to the
6.) Refer to the
7.) Refer to the
8.) Refer to the
4 - 44
3
4-9-4 "SYSCONML Assy Function Validation Procedure" on page
4-9-6 "SOM Function Validation Procedure" on page
4-9-2 "DTRX64II Assy Function Validation Procedure" on page
4-9-1 "PI128II Assy function check procedure" on page
4-9-5 "APS II Assy PCB Function Validation Procedure" on page
4-9-3 "CWD64 Assy Function Validation Procedure" on page
Section 4-9 - Board Function Checks
LOGIQ™ P6/P6 P S
RO ERVICE
4-41.
4-43.
4-37.
4-35.
4-42.
4-38.(Optional)
M
ANUAL