Table of Contents
Advertisement
3.17
[Installation Setting] Menu
This section explains the menu items on the [Installation Setting] menu.
3.17.1
How to open the [Installation Setting] menu
1. Press the MENU/ESC key to open the menu.
2. Select [9 Installation Setting].
The following confirmation message appears.
3. Select [OK].
Menu
1 TX/RX Setting
2 Gain Setting
3 Display Setting
4 Picture Setting
5 Record/Recall/Register
6 Fish Finder
7 3D Functions
8 Test
9 Installation Setting
0 Mark & Operation Support Tool
Shortcut Menu
Confirm
This menu is for installation settings regarding display, operation and
initial settings. Do you want to adjust or change these settings?
Menu
Installation Setting
1 Display Setting
2 Operation Setting
3 Motion Sensor
4 Hull Unit Setting
5 Interface Setting
6 External Data
7 Own Ship Data
8 Initialization
3. ADJUSTMENTS
Quit
OK
Quit
3-21
Advertisement
Table of Contents
