Table of Contents
Advertisement
1. MOUNTING
At factory default, the distance to the transmitting position is 450 mm (tank length:
1000 mm (800 mm travel) or 1300 mm (1100 mm travel)). To adjust the distance to
the transmitting position, unfasten the two mounting screws (M6) to remount the TX
limit switch.
TX limit
switch
1.2.9
How to adjust the bow mark direction on the transducer
When you cannot face the bow mark on the hull unit flange to the bow direction due
to installation space, rotate the transducer so that the bow mark on the transducer
points toward the ship's bow.
1. Release the transducer cable from the three cable clamps.
Cable clamp
1-12
Detailed view: TX limit switch
Mounting
screw (M6,
2 pcs)
25 mm:
Screw holes for mounting
TX limit
switch are prepared
at 25 mm intervals. You can
raise the
TX limit
switch
position max 100 mm .
TX limit switch
(factory default position)
Cable clamp
Advertisement
Table of Contents
