Table of Contents
Advertisement
3. Select [0 Next].
4. Select [4 Control Box Test].
5. Check the [ACTIVE TIME] value for [ROTATE MOTOR] and [PITCH MOTOR].
6. Press the MENU/ESC key to close the test screen.
7. Press and hold the MENU/ESC key to close the menu.
Registering the motor operating times
Register the motor operating times as follows:
1. With the MENU/ESC key pressed and held, press 1/F1, 3/F3, 5/F5 in order.
The system menu items appear on the main menu. Repeat the above procedure
to hide the system menu items.
2. Press the MENU/ESC key to open the menu.
3. Select [9 Installation Setting].
A confirmation message appears.
4. Select [OK].
5. Select [System/Maintenance].
6. Select [Motor Operating Time INIT].
7. Select [Rotate Motor].
8. Register the operating time for the rotation motor, as recorded at
"How to check the motor operating times" on page 3-18.
9. Select [Quit] on the setting box.
10. Similarly, register the operation time for the pitch motor ([Pitch Mo-
tor]).
11. Press and hold the MENU/ESC key to close the menu.
12. With the MENU/ESC key pressed and held, press 1/F1, 3/F3, 5/F5 in order to hide
the system menu items.
Menu
Test
1 Panel/SIO Test
2 Test Pattern
3 TRX Calibration
4 Control Box Test
5 Setting Display
: OFF
6 Signal Processing Data
: TVG
0 Next
Menu
Installation Setting
System/Maintenance
Motor Operating Time INIT
Rotate Motor
: 0Hour
Pitch Motor
: 0Hour
3. ADJUSTMENTS
Quit
Quit
Quit
Cancel
3-19
Advertisement
Table of Contents
