Table of Contents
Advertisement
Menu item
[8 Water Current]
[9 Wind]
[1 Net Depth]
3.17.8
[Own Ship Data] menu
Enter the own ship's information on the [Own Ship Data] menu. To display this menu,
select [7 Own Ship Data] from the [Installation Setting] menu.
Menu item
[1 Ship's Length]
[2 Ship's Width]
[3 TD Position 1]
[4 TD Position 2]
3.17.9
[Initialization] menu
You can change the language setting and restore factory default on the [Initialization]
menu. To display this menu, select [8 Initialization] from the [Installation Setting]
menu.
Note: When you select [8 Initialization] from the [Installation Setting] menu, the follow-
ing confirmation message appears. Select [OK] to open the [Initialization] menu.
Sets the input format for water current (setting range: [Disable],
[NMEA]).
Sets the input format for wind data (setting range: [Disable],
[NMEA]).
Sets the input format for net depth data (setting range: [Dis-
able], [NMEA]).
Menu
Installation Setting
Own Ship Data
1 Ship's Length
: 75m
2 Ship's Width
: 25m
3 TD Position 1
: 15m
4 TD Position 2
: 0.0m
Sets the length of the ship.
Sets the width of the ship at its widest point.
Sets the distance from transducer to bow.
Sets the distance from transducer to keel. Set a positive value for
starboard installations, a negative value for port installations.
Menu
Installation Setting
Initialization
1 Language
: English
2 Item Attribution
: Non-Changeable
3 Reset User Program
4 Reset System
Confirm
The selected item will no longer be locked.
Are you sure?
Remarks
Quit
Remarks
Quit
OK
Cancel
3. ADJUSTMENTS
3-27
Advertisement
Table of Contents
