Table of Contents
Advertisement
3. ADJUSTMENTS
3.17.6
[Interface Setting] menu
Set the transmission rate for the NMEA ports on the [Interface Setting] menu. To dis-
play this menu, select [5 Interface Setting] from the [Installation Setting] menu.
Menu item
[1 NMEA1 Baud Rate] Set the transmission rate for each NMEA port (setting range:
[2 NMEA2 Baud Rate]
[3 NMEA3 Baud Rate]
[4 NMEA4 Baud Rate]
[5 NMEA5 Baud Rate]
3.17.7
[External Data] menu
Select the input format for external data on the [External Data] menu. To display this
menu, select [6 External Data] from the [Installation Setting] menu.
Menu item
[1 Date & Time]
[2 Heading]
[3 Speed & Course]
[4 Speed Sensor]
[5 LAT/LON]
[6 Water Depth]
[7 Water Temperature]
3-26
Installation Setting
Interface Setting
1 NMEA1 Baud Rate
2 NMEA2 Baud Rate
3 NMEA3 Baud Rate
4 NMEA4 Baud Rate
5 NMEA5 Baud Rate
[4800bps], [9600bps], [19200bps], [38400bps]).
Menu
Installation Setting
External Data
1 Date & Time
: NMEA
2 Heading
: AD10
3 Speed & Course
: NMEA(SOG)
4 Speed Sensor
: GPS/DR
5 LAT/LON
: NMEA
6 Water Depth
: NMEA
7 Water Temperature
: NMEA
8 Water Current
: NMEA
9 Wind
: NMEA
0 Next
Sets the input format for date and time data (setting range: [Dis-
able], [NMEA]).
Sets the input format for heading data (setting range: [Disable],
[AD10], [NMEA]).
Sets the input format for ship's speed and course data (setting
range: [Disable], [NMEA (SOG)], [NMEA (STW)]).
Sets the type of device which is used as the speed and course
data source (setting range: [Disable], [GPS/DR], [Doppler/DR]).
Sets the input format for position data (setting range: [Disable],
[NMEA]).
Sets the input format for water depth (setting range: [Disable],
[NMEA]).
Sets the input format for water temperature (setting range: [Dis-
able], [NMEA]).
Menu
Quit
: 4800bps
: 4800bps
: 4800bps
: 4800bps
: 4800bps
Remarks
Quit
Menu
Installation Setting
External Data
1 Net Depth
0 Next
Remarks
Quit
: NMEA
Advertisement
Table of Contents
