Table of Contents
Advertisement
9.3
[Installation Setting] Menu
9.3.1
How to open the [Installation Setting] menu
1. Press the MENU/ESC key to open the main menu.
2. Left-click [9 Installation Setting].
3. Left-click [OK].
9.3.2
[Display Setting] menu
The [Display Setting] menu sets various display-related items according to operator's
preference. To display the menu, open the [Installation Setting] menu, then select [1
Display Setting].
[1 Orientation Mode]: Selects the orientation mode, among Head-up, North-up,
Course-up.
[2 Echo Display Area]: Selects the echo display mode, [Within Range] or [Full
Screen].
[3 Full Screen Area]: Used when [2 Echo Display Area] is set to [Full Screen]. Ex-
pands the detection range and shows echoes outside the normal display area. Op-
tions are [1.3R], [1.6R], [1.9R] (R = ratio of increase in relation to currently selected
range).
* *
*: For the service
technician (no use)
9. OTHER SETTINGS
9-11
Advertisement
Table of Contents
