Table of Contents
Advertisement
3. ADJUSTMENTS
5. Select [Save to EXT Device].
The following message appears.
6. Select [Change Destination].
7. Specify the destination for the backup data, then click [OK].
8. Select [Save].
The backup data is saved to the specified destination.
9. Press and hold the MENU/ESC key to close the menu.
10. With the MENU/ESC key pressed and held, press 1/F1, 3/F3, 5/F5 in order to hide
the system menu items.
Note: The error message "Disk space insufficient. Delete unnecessary files." appears
if the save destination does not have sufficient space for the backup data. If this oc-
curs, select [Delete Data] to delete unnecessary files, then repeat the above proce-
dure.
3.9.2
How to import the backup data
Note: Data import requires the connection of an external media to the processor unit.
1. With the MENU/ESC key pressed and held, press 1/F1, 3/F3, 5/F5 in order.
The system menu items appear on the main menu. Repeat the above procedure
to hide the system menu items.
2. Press the MENU/ESC key to open the menu.
3. Select [Other Setting].
4. Select [Backup Data].
5. Select [Load from EXT Device].
The following message appears.
3-12
Save Backup Folder
Are you sure to want to save the backup folder to external
storage ?
Destination:E:¥
Save
Change Destination
Change Destination
Destination
OK
Update Backup Folder
Update the backup folder? (Restart is required.)
Cancel
Disk INFO
Cancel
OK
Cancel
Advertisement
Table of Contents
