Table of Contents
Advertisement
8. Reattach the trunnion receptacle.
9. Assemble the cable gasket on the top of the main shaft.
Note: The following marking appears on the cable gasket and transducer cable.
Assemble the cable gasket so that each marking points toward the ship's bow.
10. Remove the four bolts inserted to the tank guide at step 4.
11. Raise the transducer manually.
12. Secure the transducer cable with the three clamps indicated at step 1.
Note: For how to route the transducer cable, see page 2-3.
1.2.10
How to check the soundome assembly operation
After installing the hull unit, check the soundome assembly operation before wiring.
1. Prepare a power cable (supplied locally) to supply the power to the soundome as-
sembly.
Pins 1 through 8
are not used.
2. Turn the control box breaker off.
Terminal block 733-112-FUR
1 2 3 4 5 6 7 8 9 10 11 12
+
48 VDC
4.5 A
Power Supply
These markings must be
faced toward the bow.
-
*
: Recommended
• Manufacturer: COSEL CO., LTD.
*
• Model: PJA300F-48
1. MOUNTING
1-15
Advertisement
Table of Contents
