Table of Contents
Advertisement
1. MOUNTING
3. Insert three mounting screws (M10 bolts or coach screw φ10, supplied locally) to
the bolt holes on the top of the unit.
Mounting screw
(M10 bolt or coach
Note: Be sure to use the bolt holes on the top of the unit. When the back of the
unit is not in contact with a bulkhead, prepare a stay or mounting base, referring
to the following example.
Angle size:
65 mm×65 mm×6 mm
1-28
screw Ø10
Example 1: Secure the unit with a stay
Example 2: Secure the unit on
a dedicated mounting base
Advertisement
Table of Contents
