Overview - Transmission Housing And Selector Mechanism - Volkswagen Golf 2015 Repair Manual

5.3

Overview - Transmission Housing and Selector Mechanism

1 - Bolt
❑ Removing and instal‐
ling. Refer to
⇒ 2.1 Overview - Differ‐
ential , page 212 .
2 - Left Flange Shaft
❑ With pressure spring
and tapered ring
❑ Removing and instal‐
ling. Refer to
⇒ 1.2 Left Seal, Replac‐
ing , page 207 .
❑ Assembling. Refer to
⇒ 2.1 Overview - Differ‐
ential , page 212 .
3 - Locking Ring
❑ For the metal cover
❑ Not used in plastic cov‐
ers
4 - Cover
❑ Secured with metal
locking ring
❑ Without plastic locking
ring
❑ Allocate the compo‐
nents using the Parts
Catalog.
❑ Made of metal or plastic.
Refer to ⇒ page 120
5 - Locking Ring
❑ For the grooved ball
bearing/input shaft. Re‐
fer to
⇒ 1.1 Overview - Input
Shaft , page 157 .
❑ The thickness must be determined again on transmissions with reinforcements (manual transmission
0FB). Refer to ⇒ page 125
6 - Back-Up Lamp Switch - F4-
❑ 20 Nm
❑ With permanent seal
7 - Seal
❑ If present, replace after removing
❑ Not installed on all transmissions
8 - Oil Drain Plug
❑ Tightening specification. Refer to
9 - Seal
❑ Replace after removing
10 - Bolt
❑ 6 Nm
11 - Transmission Neutral Position Sensor - G701-
❑ For vehicles with the Start/Stop System
.
⇒ Fig. Different Versions of Fluid Fill and Drain Plugs , page 142
Golf 2015 ➤ , Golf Variant 2015 ➤
Manual Transmission - Edition 02.2016
5. Transmission, Disassembling and Assembling
111