Volkswagen Golf 2015 Repair Manual page 215

– Install the seal all the way in without tilting it.
– Install the seal all the way in without tilting it.
– Push the flange shaft -A- toward the transmission and secure.
– Attach the right drive axle to the transmission flange shaft
-A-. Refer to ⇒ Suspension, Wheels, Steering; Rep. Gr. 40 ;
Drive Axle; Drive Axle, Removing and Installing .
– If removed, install the heat shield over the right drive axle. Re‐
fer to ⇒ Suspension, Wheels, Steering; Rep. Gr. 40 ; Drive
Axle; Drive Axle Heat Shield, Removing and Installing .
– Check transmission fluid level. Refer to
⇒ 8.1 Transmission Fluid Level, Checking , page 142
– Install the noise insulation. Refer to ⇒ Body Exterior; Rep. Gr.
66 ; Noise Insulation; Overview - Noise Insulation .
Tightening Specification
♦ Refer to ⇒ 2.1 Overview - Differential , page 212
Golf 2015 ➤ , Golf Variant 2015 ➤
Manual Transmission - Edition 02.2016
.
.
211
1. Seals