Only Check Position of Adjustment Mechanism with New Pres‐
sure Plates
•
Both edges -A- of the adjusting ring must be located between
both notches -arrows B-.
•
If the adjusting ring takes on a different position with new pres‐
sure plates, pressure plate and clutch plate must not be in‐
stalled.
•
With used clutches, the adjusting ring may take on a position
outside of the notches.
– Use the -3067- when installing.
Engines Having a Crankshaft with a Smaller Diameter -arrow-, or
Engines Having a Needle Bearing -arrow- in the Crankshaft
Golf 2015 ➤ , Golf Variant 2015 ➤
Manual Transmission - Edition 02.2016
51
2. Clutch