Volkswagen Golf 2015 Repair Manual page 131

– Tighten the bolts -3- for the shift lever cover -4-.
– Install the locking bolt -2-, lock elbow -arrow- must not be in‐
stalled when doing so.
– Install the Back-Up Lamp Switch - F4- -1-.
– Transmission for vehicles with start/stop system: Insert the
Transmission Neutral Position Sensor - G701- -arrow- and
tighten the bolt.
– Install the input shaft seal so that it is flush.
– Install the clutch slave cylinder with release bearing. Refer to
⇒ 1.11 Clutch Slave Cylinder with Release Bearing, Remov‐
ing and Installing , page 33
– Move the shift lever (selector lever) through all the gears.
– Install the cover as follows:
Cover Differentiation
-I- is a metal cover; secured with securing ring -A-.
-II- is a plastic cover; without securing ring.
.
Golf 2015 ➤ , Golf Variant 2015 ➤
Manual Transmission - Edition 02.2016
5. Transmission, Disassembling and Assembling
127