Volkswagen Golf 2015 Repair Manual page 125

Note
Pry the cap -1- off with a screwdriver -2-.
Plastic Cover
Carefully remove all tabs -A-. Do not damage the transmission
housing when doing so.
– Remove the cap -A-.
• Make sure the individual parts of the cover are removed, if
necessary.
Continuation for All
Remove the locking ring -C- from the grooved ball bearing on the
input shaft/transmission housing as follows:
– Hold one end of the locking ring secure with the Screwdriver
-A-.
– Pry the other end out of the groove in the grooved ball bearing
in direction of -arrow- using the Screwdriver -B-.
– Pry out the rest of the locking ring using the screwdriver -B-.
Golf 2015 ➤ , Golf Variant 2015 ➤
Manual Transmission - Edition 02.2016
5. Transmission, Disassembling and Assembling
121