Volkswagen Golf 2015 Repair Manual page 183

On Transmissions with Reinforcement Measures, Install Collar
Bushing -A- to Stop.
Note
Allocate transmission via code letters:
• Installation position of the collared sleeve -A-: The collar
-arrow- points to the 1st gear wheel.
– Then install the 4th gear wheel with needle bearing.
Checking the 4th Gear Synchronizer Ring for Wear
-A- = Brass Synchronizer Ring
Gap Dimension Installation Dimen‐
-a-
4th Gear 1.0 to 1.7 mm
-B- = Steel Synchronizer Ring
Gap Dimension Installation Dimen‐
-a-
4th Gear 1.3 to 2.4 mm
– Press synchronizer ring onto taper of the gear wheel and
measure gap dimension -a- using a feeler gauge.
Wear Limit
sion
0.5 mm
Wear Limit
sion
0.8 mm
Golf 2015 ➤ , Golf Variant 2015 ➤
Manual Transmission - Edition 02.2016
179
2. Output Shaft