9
Drive Axles, Removing and Installing
⇒ "9.1 Twelve-Point Bolt with Ribs, Loosening and Tightening,
Drive Axle Threaded Connection", page 77
⇒ "9.2 Twelve-Point Bolt without Ribs, Loosening and Tightening,
Drive Axle Threaded Connection", page 78
⇒ "9.3 Drive Axle with CV Joint, Removing and Installing",
page 80
.
⇒ "9.4 Right Axle Shaft with Mounted CV Joint, Removing and
Installing", page 83
.
⇒ "9.5 Drive Axles with Triple Roller Joint AAR2600i, Removing
and Installing", page 88
⇒ "9.6 Drive Axles with Triple Roller Joint AAR3300i, Removing
and Installing", page 92
9.1
Twelve-Point Bolt with Ribs, Loosening
and Tightening, Drive Axle Threaded
Connection
Special tools and workshop equipment required
♦ Socket AF 24 mm - T10361A-
♦ Digital Torque Wrench - VAG1756A-
WARNING
When disassembling and performing repairs on a vehicle, the
drive axles must not hang down loosely and contact the stops
in the joint by over bending.
.
.
.
.
Jetta 2011 ➤ , Jetta 2013 ➤
Suspension, Wheels, Steering - Edition 08.2015
9. Drive Axles, Removing and Installing
77