Volkswagen Jetta 2011 Repair Manual page 195

19 - Washer
20 - Nut
❑ Self-locking
❑ Always replace if removed
❑ Always tighten the threaded connections in curb weight position. Refer to
⇒ "10 Rear Axle Curb Weight (Multi-link Rear Suspension)", page 182
21 - Wheel Bearing Housing
❑ Removing and installing. Refer to
⇒ "13.2 Wheel Bearing Housing, Removing and Installing", page 202
22 - Washer
23 - Bolt
❑ 130 Nm + 90° turn
❑ Always replace if removed
❑ Always tighten the threaded connections in curb weight position. Refer to
⇒ "10 Rear Axle Curb Weight (Multi-link Rear Suspension)", page 182
24 - Tie Rod
❑ Opened downward (the right and left tie rods are the same)
❑ Allocation. Refer to the Parts Catalog.
❑ Removing and installing. Refer to
25 - Bolt
❑ Always replace if removed
26 - Nut
❑ 70 Nm + 180° turn
❑ Self-locking
❑ Always replace if removed
❑ Always tighten the threaded connections in curb weight position. Refer to
⇒ "10 Rear Axle Curb Weight (Multi-link Rear Suspension)", page 182
Suspension, Wheels, Steering - Edition 08.2015
⇒ "12.9 Tie Rod, Removing and Installing", page 198
12. Subframe, Transverse Link and Tie Rod (Multi-Link Suspension)
Jetta 2011 ➤ , Jetta 2013 ➤
.
.
.
.
.
187