Volkswagen Jetta 2011 Repair Manual page 36

Jetta 2011 ➤ , Jetta 2013 ➤
Suspension, Wheels, Steering - Edition 08.2015
– Remove the hex nut -1- from the right and left coupling rod
-3-.
– Remove the coupling rod -3- from the stabilizer bar -2- on the
left and right sides.
– Remove the nuts -arrows- on the left and right side of the ve‐
hicle.
– Remove the control arm from the ball joint.
– Loosen the nut from the tie rod end, but do not unscrew yet.
Caution
To protect the thread, screw the nut on the pin a few turns.
– Remove the tie rod end from the wheel bearing housing and
remove the nut.
1 - Puller - Ball Joint - T10187-
– Remove the bolts -11- and then remove the pendulum support
from the transmission.
– Secure the subframe. Refer to
⇒ "4.3 Subframe, Securing", page 11
28
Rep. Gr.40 - Front Suspension
.