Volkswagen Jetta 2011 Repair Manual page 120

Jetta 2011 ➤ , Jetta 2013 ➤
Suspension, Wheels, Steering - Edition 08.2015
Installed Location of Spring Washer and Thrust Washer On Outer
Joint
1 - Plate Spring
2 - Thrust Ring
– Install the new circlips.
– Slide the new CV boot onto the drive axle if necessary.
– Use a plastic hammer to install it on the shaft until the locking
ring locks secure.
Drive Off Cover for Inner Joint
– Remove the circlip.
– Remove both clamps, and push the CV boot toward outer joint.
– Drive off protective boot with drift.
Inner CV Joint, Removing
Assembling
Pressing On the Inner CV Joint
– Press on joint until stop.
– Install the circlip.
112
Rep. Gr.40 - Front Suspension