Volkswagen Jetta 2011 Repair Manual page 175

– Slide the parking brake cable -1- into the guide tube -3- and
engage it in the bracket -2-.
Note
Attach the parking brake cable to at the marking on the cable.
– Attach parking brake cable -1- to pull-rod -2-.
– Pretension the parking brake cable using the adjustment nut
-arrow-.
– Adjust the parking brake. Refer to ⇒ Brake System; Rep. Gr.
46 ; Parking Brake; Parking Brake, Adjusting .
– Install the wheel and tighten. Refer to
⇒ "2 Wheel Installation Tightening Specifications",
page 237 .
Tightening Specifications
Component
Plate on rear axle trailing arm; rear bolted connections
♦ Always use new nuts and bolts.
Plate on rear axle trailing arm; front bolted connections
♦ Always use new nuts and bolts.
Jetta 2011 ➤ , Jetta 2013 ➤
Suspension, Wheels, Steering - Edition 08.2015
Tightening Specification
50 Nm + 90° turn
5. Axle Beam Plate (Torsion Beam)
50 Nm
167