Volkswagen Jetta 2011 Repair Manual page 216

Jetta 2011 ➤ , Jetta 2013 ➤
Suspension, Wheels, Steering - Edition 08.2015
♦ Torque Wrench 1410 - VAG1410-
♦ Socket - XZN 18mm - T10162A-
Perform the Following
Removing
– Loosen the wheel bolts.
– Raise the vehicle.
– Remove wheel.
– Loosen dust cap from seat by tapping lightly on claw of Puller
- Grease Cap - VW637/2- -1-.
– Press of dust cap.
1 - Puller - Grease Cap - VW637/2-
– Remove brake carrier with brake caliper and hang on body
with tie wire. Refer to ⇒ Brake System; Rep. Gr. 46 .
Note
Suspend brake caliper from body.
– Remove the brake rotor bolt and the brake rotor.
– Remove bolt -1- using Socket - XZN 18mm - T10162A- -2-.
Caution
Never use an impact wrench when removing the bolt -1- using
the Socket - XZN 18mm - T10162A- -2-.
208
Rep. Gr.42 - Rear Suspension