Volkswagen Jetta 2011 Repair Manual page 49

Using the Drive Shaft Remover - T10520- :
– Secure the Drive Shaft Remover - T10520- -1- with three
wheel bolts -2- on the wheel hub, so that the drive axle -3- can
be pressed out.
– Follow the specified sequence exactly.
I - Tighten the knurled nut -1- hand-tight.
II - Only turn the bolt -2- using a wrench and press out the drive
axle using the Drive Shaft Remover - T10520- .
Note
At the end of the tasks or to set back, the spindles must be brought
back into the original position so that the hydraulic operation can
be used.
– Remove the control arm from the ball joint.
– Move the control arm downward as much as needed.
Jetta 2011 ➤ , Jetta 2013 ➤
Suspension, Wheels, Steering - Edition 08.2015
5. Front Suspension and Control Arm
41