Electromechanical Steering Gear, Servicing; Overview - Electromechanical Steering Gear - Volkswagen Jetta 2011 Repair Manual

Jetta 2011 ➤ , Jetta 2013 ➤
Suspension, Wheels, Steering - Edition 08.2015
8 Electromechanical Steering Gear,
Servicing
⇒ "8.1 Overview - Electromechanical Steering Gear", page 336
⇒ "8.2 Tie Rod, Removing and Installing", page 337
⇒ "8.3 Tie Rod End, Removing and Installing", page 339
⇒ "8.4 Boot, Removing and Installing", page 340
⇒ "8.6 Tie Rod Length, Checking and Adjusting", page 342
⇒ "8.6 Tie Rod Length, Checking and Adjusting", page 342
⇒ "8.7 Tie Rod End Allocation", page 343
8.1 Overview - Electromechanical Steering
Gear
Currently, there is no service work to be performed on steering
gear.
1 - Right Tie Rod End
❑ Identified with "A". Refer
to ⇒ page 338
❑ Removing and instal‐
ling. Refer to
⇒ "8.3 Tie Rod End, Re‐
moving and Installing",
page 339 .
❑ Checking. Refer to
⇒ "8.5 Checking Play,
Fastening and Joint
Boots of Tie Rod Ends",
page 342 .
❑ Installation position. Re‐
fer to
⇒ "8.7 Tie Rod End Al‐
location", page 343
❑ Allocation. Refer to the
Parts Catalog.
2 - Nut
❑ 70 Nm
3 - Clamp
4 - Boot
❑ Must not be twisted after
toe is adjusted
❑ Removing and instal‐
ling. Refer to
⇒ "8.4 Boot, Removing
and Installing",
page 340 .
5 - Clamp
❑ Replacing
❑ Tensioning. Refer to
⇒ page 343 .
6 - Tie rod
❑ 100 Nm
❑ Removing and installing. Refer to
336
Rep. Gr.48 - Steering
⇒ "8.2 Tie Rod, Removing and Installing", page 337 .