Volkswagen Jetta 2011 Repair Manual page 211

– Remove ABS wheel speed sensor from wheel bearing hous‐
ing.
– Remove the bolt -arrow-.
– Remove bolt for tie rod -1-, upper transverse link -2- and lower
transverse link -3- from wheel bearing housing -4-.
– Remove connecting link -arrow- from the wheel bearing hous‐
ing.
– Hold wheel bearing housing tightly and remove the bolts
-arrows-.
– Pull the coupling rod -1- out of the trailing arm.
Installing
– Install tie rod bolt -1-, upper transverse link -2- and lower
transverse link -3-.
– Screw coupling rod -arrow- on wheel bearing housing hand-
tight.
Suspension, Wheels, Steering - Edition 08.2015
13. Wheel Bearing Housing and Trailing Arm (Multi-Link Suspension)
Jetta 2011 ➤ , Jetta 2013 ➤
203