Volkswagen Jetta 2011 Repair Manual page 201

– Remove bracket -1- by pressing out rivet inner pin -arrow-.
– Disconnect the speed sensor connectors.
– Unclip the speed sensor wire out of the bracket -1- -arrows-.
– Unclip the brake lines -1- from the bracket -arrow- on the left
side of the body.
– Remove the clip -2- from the subframe -3- and loosen the
brake hose from it.
Note
Do not disconnect the brake line.
– Secure both sides of the vehicle on the hoist arms using Ten‐
sioning Straps - T10038- .
1 - Tensioning Strap - T10038-
WARNING
The vehicle could slide off the hoist if it is not secured.
– Secure the subframe. Refer to
⇒ "12.4 Subframe, Securing", page 189
Suspension, Wheels, Steering - Edition 08.2015
.
12. Subframe, Transverse Link and Tie Rod (Multi-Link Suspension)
Jetta 2011 ➤ , Jetta 2013 ➤
193