APRILIA RSV4 1100 Factory Service Station Manual page 99

RSV4 1100 Factory
Electrical system
WIRING TABLE E2 - INSTRUMENT SUPPORT
ARCH AND FRONT PART
Position the main wiring harness and secure it to
the right hand instrument holder support using a
grey reference clamp
WIRING TABLE E3 - INSTRUMENT SUPPORT
ARCH AND FRONT PART
Using the second pre-installed clamp on the in-
strument support arch, group together all the ca-
bles from the left hand side of the handlebar, and
fasten them together, making a note of their re-
spective lengths first
WIRING TABLE E4 - INSTRUMENT SUPPORT
ARCH AND FRONT PART
Cable output on right hand side of the instrument
support
1. RH light switch wiring harness
WIRING TABLE E5 - INSTRUMENT SUPPORT
ARCH AND FRONT PART
Cable output on left hand side of the instrument
support
1. LH light switch wiring harness;
2. Clutch switch wiring harness;
3. Traction control commands wiring harness.
ELE SYS - 99