Chassis
•
Fit the washer on the screw
•
Tighten the screw.
•
Install the rear shock absorber and the
linkages.
•
Fit the rear brake calliper plate.
•
Fasten the two pipe grommets on the
swingarm
•
Install the rear wheel and the exhaust system.
•
Fit the pinion casing.
•
Adjust the chain tension
Drive chain
Removing
The transmission chain, although "closed", has a
different coloured hammerlock (where provided),
which should be used to perform opening / disas-
sembling procedures.
NOTE
WHERE PRESENT, THE HAMMERLOCK (1) MAY ALSO BE
IDENTIFIED BY A SIGN (2) APPLIED IN THE MOUNTING
LINES DURING MANUFACTURING.
CHAS - 438
RSV4 1100 Factory