APRILIA RSV4 1100 Factory Service Station Manual page 100

Electrical system
WIRING TABLE E6 - INSTRUMENT SUPPORT
ARCH AND FRONT PART
Insert the connectors in their housings on the arch
1. Left turn indicator connector
2. Right hand turn signal connector
WIRING TABLE F - FRONT WHEEL ABS SEN-
SOR PASSAGE
(OHLINS FORKS)
1. ABS sensor
2. Cable grommet
WIRING TABLE F1 - FRONT WHEEL ABS SEN-
SOR PASSAGE
(SACHS FORK)
1. ABS sensor
2. Cable guide
3. Clamp
4. Cable grommet
WIRING TABLE F2 - FRONT ABS SENSOR
WIRING
Wherever possible, maintain the ABS sensor wir-
ing as externally as possible.
•
Clamp the ABS sensor wiring to the
main wiring loom.
•
Using a small clamp (1), secure the
ABS sensor wiring to the radiator.
ELE SYS - 100
RSV4 1100 Factory