RSV4 1100 Factory
WIRING TABLE O - AIR FILTER HOUSING
ZONE
Check that the quick shift sensor connector is con-
nected correctly
WIRING TABLE O - AIR FILTER HOUSING
ZONE
Check that the side stand switch connector is con-
nected correctly.
Back side
TABLE A - LICENSE PLATE FRAME PRE-FIT-
TING
The right arrow is identified with the RED taping
and must be inserted on the license plate holder
as indicated in the picture. The arrow with the red
tape must be connected with the wiring harness
branch that includes the grey tape
1. Left LED indicator
2. Right LED indicator
3. Grey tape
4. Red tape
Electrical system
ELE SYS - 115