APRILIA RSV4 1100 Factory Service Station Manual page 289

RSV4 1100 Factory
Inspecting the cover components
•
Unscrew and remove the three Blow-
by system fitting screws.
•
Remove the Blow-by system fitting.
•
Replace the O-ring with a new one of
the same type
•
Remove the flywheel cover.
•
Remove the Seeger ring.
•
Remove the shim washer.
•
Remove the oil seal.
CAUTION
DURING REFITTING REPLACE THE OIL SEAL WITH A
NEW ONE OF THE SAME TYPE.
SET THE NEW OIL SEAL WITH THE MARKING ON THE
EDGE FACING OUTWARD.
Engine
ENG - 289