APRILIA RSV4 1100 Factory Service Station Manual page 102

Electrical system
WIRING TABLE H - USB PORT (IF FITTED)
The USB port wiring harness must be routed be-
hind instrument cluster and the port must be fas-
tened by means of the support bracket.
Central part
TABLE A - IGNITION RELAY PRE-ASSEMBLY
The positive battery cable must be connected to
the hole identified by the letter B (Battery) using
M5x8 screw
1. Start-up relay
2. Battery positive cable pole (identified by the let-
ter "B")
3. Vehicle wiring starter motor cable pole (identi-
fied by the letter "M")
TABLE A1 - IGNITION RELAY PRE-ASSEMBLY
If the battery positive cable is not connected to the
ignition relay correctly it may result in fires and in-
correct vehicle operation.
1. Ignition relay
2. Battery positive cable
ELE SYS - 102
RSV4 1100 Factory