APRILIA RSV4 1100 Factory Service Station Manual page 113

RSV4 1100 Factory
Electrical system
WIRING TABLE N2 - LAMBDA PROBES
CHECK THAT THE FRONT LAMBDA PROBE
CONNECTOR HAS BEEN CONNECTED COR-
RECTLY
1. Front lambda probe wiring harness routing
WIRING TABLE N3 - LAMBDA PROBES
1. Front lambda probe cable from main wiring har-
ness
2. Front lambda probe cable to probe
Route the lambda probe cable through the cable
gland (3) and attach the connector to the support
(4) on the bracket.
WIRING TABLE N4 - LAMBDA PROBES
1. Lambda probe cable in front of breather tubes
ELE SYS - 113