APRILIA RSV4 1100 Factory Service Station Manual page 272

Engine
Gearbox
Pos. Description
1 "Philips" cylindrical head hex. socket
screw
2 Hex. socket flat head counter sunk
screw for fastening the bearing re-
taining plates
3 Flanged, hex. head flange retaining
screws
4 Special screw with index lever fas-
tening collar
5 Pinion fastening
6 Pre-selector retaining screw on
crankcase
7 Flanged, hex. head gear indicator
fastening screws
Removing the gearbox
•
Remove the gearbox selector.
•
Remove the clutch housing.
•
Remove the gear sensor from the flywheel side.
ENG - 272
G
EARBOX
Type Quantity
M6x20 1
M6x16 3
M8x25 6 25 Nm (18.44 lb ft)
M6 1
- 1 50 Nm (36.88 lb ft)
- 1 25 Nm (18.44 lb ft)
M5x15 2
RSV4 1100 Factory
Torque Notes
10 Nm (7.38 lb ft) Loct. 243
10 Nm (7.38 lb ft) Loct. 243
10 Nm (7.38 lb ft) Loct. 243
Loct. 243
Pre-impregnated
screw in absence of
3M 2353
6 Nm (4.43 lb ft)
-
-