APRILIA RSV4 1100 Factory Service Station Manual page 78

Maintenance
•
Retrieve the pad and replace with a
suitable component to achieve the cor-
rect valve clearance.
Refer to the table: "Calibrated pad thickness-
es" to identify the suitable thickness.
•
Fit the tappet.
See also
Calibrated pad thickness
•
Loosen the distribution gear's lock
screw and move the gear itself from the
mounting tool to the camshaft.
•
Unscrew and remove the two screws
(1).
•
Remove the tool.
•
Position the U bolt (2) and the oil pipe
(3).
•
Insert the two screws (1).
•
Tighten all the U bolts' screws working
in stages and diagonally.
•
Align the intake camshaft with the spe-
cific hole on the U bolt.
•
Insert the specified pin.
Specific tooling
020851Y Camshaft timing pin
MAIN - 78
RSV4 1100 Factory