APRILIA RSV4 1100 Factory Service Station Manual page 367

RSV4 1100 Factory
•
Install the crankshaft blocking tool.
•
Tighten the primary shaft fixing nut.
Specific tooling
020850Y Primary gear lock
•
Insert the tone wheel on the crank-
shaft.
The crankshaft and the tone wheel have a bevel
that identifies the fitting direction.
•
Tighten the tone wheel fixing screw.
•
Remove the special tool.
Specific tooling
020850Y Primary gear lock
Installing connecting rods - pistons
The piston rings are different and must be fitted
with the "KDN5" markings (for the upper one)(A)
and "K-TOP and KDN5" markings (for the lower
one )(B) facing upward.
Engine
ENG - 367