RSV4 1100 Factory
•
Fit the turn indicator connectors in the
relative housings, noting the colours of
the wires identifying the correct side.
•
Join the remaining connectors and ar-
range the cable carefully in the space
available within the arch brace. Note
that there are two pairs of connectors
which may be connected incorrectly.
The male connector on the cable with the red strip
must be connected to the female connector on the
longer cable.
•
Reconnect the instrument panel con-
nector
NOTE
WHEN REASSEMBLING THE CONNECTORS, THE SLIDES
MUST SLIDE FREELY UP TO THE LIMIT STOP, THUS FA-
CILITATING THE CONNECTOR'S INSERTION. THE CATCH
SHOULD SNAP INTO PLACE ONCE THE LIMIT STOP IS
REACHED.
Radiator cover
•
Remove the side fairings.
•
Remove the fairing lug.
•
Operating from both sides, unscrew
and remove the fixing screws.
Bodywork
BODYW - 537