APRILIA RSV4 1100 Factory Service Station Manual page 397

RSV4 1100 Factory
Specification
Rebound damping adjustment, screw (1)
Compression damping adjustment, screw (2)
Spring pre-loading, nut (3)
Stems (A) protrusion from top plate (excluding cover)
Specification
Rebound damping adjustment, screw (1)
Compression damping adjustment, screw (2)
Spring pre-loading, nut (3)
Stems (A) protrusion from top plate (excluding cover)
(*) = clockwise
(**) = anticlockwise
Removing the fork legs
•
Remove the front wheel.
•
Support the fork shaft and loosen the
screws on the upper plate.
•
Disconnect the clutch cable.
•
Loosen the screws on the handlebars.
STANDARD
ADJUSTMENT
RACING
ADJUSTMENT
( )
FOR ROAD USE
Desc./Quantity
Unscrew (**) 12 clicks from fully closed (*)
Unscrew (**) 12 clicks from fully closed (*)
screw (*) 8 turns from fully open (**)
3 notches/ 12 mm (3 notches/0.47 in)
( )
TRACK USE ONLY
Desc./Quantity
Unscrew (**) 12 clicks from fully closed (*)
Unscrew (**) 12 clicks from fully closed (*)
screw (*) 8 turns from fully open (**)
3 notches/ 12 mm (3 notches/0.47 in)
Suspensions
SUSP - 397