Activation Of The Rear Pto Shaft - Independent Revolutions - Stationary Working Mode - Zetor Proxima CL 80 Operator's Manual

Activation of the rear PTO shaft - independent revolutions - stationary working mode

The number of PTO shaft revolutions depends on the number of engine revolutions.
When the tractor is not going with its engine running:
A - When the clutch pedal is pressed, use the gear shift lever to select suitable speed of the rear PTO shaft.
Release the clutch pedal.
B - Set proper display of revolutions on the display of the instrument panel according to selected revolutions
of the rear PTO shaft.
C - When the clutch pedal is pressed, move the gear shift lever of dependent and independent revolutions to
the upper position (a) to shift independent revolutions of the rear PTO shaft. Release the clutch pedal.
D - Brake the tractor with the hand brake.
E - If the tractor is equipped with the reversal system, move the gear shift lever to the neutral position.
- If the tractor is equipped with the reductor of crawling speeds, move the lever of the reductor of crawling
speeds to the neutral position.
F - Leave the driver's seat.
G - Press the button on the right pillar of the cabin for at least one second to activate the rear PTO shaft.
The operator must not sit on the driver's seat when pressing the button.
H - Rotation of the rear PTO shaft and the working mode of the rear PTO shaft are indicated by displaying
the number of revolutions and the pictogram of the working mode on the display of the instrument panel.
Press the button on the right column of the cabin for interruption of torque transmission from
the rear PTO shaft.
If the operator, when working with the rear PTO
shaft in the stationary working mode, sits on the
driver's seat, the working mode automatically
changes to the common mode; this state is indicated
by a changed pictogram on the instrument panel.
If the operator, when working with the rear PTO
shaft in the stationary working mode, moves the
tractor, an audio signal is generated and the rear PTO
shaft is deactivated.
PTO DRIVE OF AGRICULTURAL MACHINES
P18N082
P18N023
103